Inverter Welder MMA AC DC TIG 200P

Key Specification

• 2 Stroke and 4 Stroke – circuit: at 2-stroke, the torch button of the TIG tube package  has to remain pressed and held. Once the button is released the arc is extinguished. At 4-stroke the arc remains stable after pressing. Only by pressing the torch button the arc is extinguished and the current reduction occurs automatically with the gas-run time. Professional settings in which you achieve results of a quality that impress even the professional user.
• Antistick: prevents annealing of the electrode (less consumable electrodes), because the power is immediately terminated.
• Hot Start: automatic voltage increase at the start
• HF Ignition: high-frequency contactless ignition to the workpiece.
• MMA: manual metal arc welding.
• TIG tube package with ball joint and with integrated control switch.
• Adjustable welding current: adjustable between 0 and 200 A (for pulse mode upper value).
• Automatic slow current reduction after switching off the tube package. Adjustable between 0 - 10 seconds (makes a clean finish, there are no blowholes).
• Gas preliminary time: important to protect the weld from air supply and to create a gas atmosphere
• Gas post flow time: saves the tungsten electrode against excessive wea. and protects the weld from oxidation.
• Gas magnetic valve: will open only when pressing the hand torch or the foot pedal and closes when the welding process is completed.
• Automatic cooling ventilators.
• Overheating protection: turns on when the device is overloaded. A red control light turns on, and goes off when the device is cooled.
• Current shift: only for aluminum welding of importance. AC welding causes a shift of the current to positive or negative wave motion of the current

• ---