4Pole NS 630N MCCB

Key Specification

BDM2-X Moulded Case Circuit Breaker
New design, Adjustable Amps
Comply with IEC60947-2
Up to 1600Amp
Tripping types:Thermal Magnetic
Amps ranges: 100A, 160A, 250A, 400A, 630A, 800A,1250A, 1600A
Frequency: AC 50/60Hz
Rated operating voltage: 690V and below
Rated insulating voltage: 750V
Poles: 3, 4P
Utilization category: A

Main Technical Specifications

Trip units main technical parameter

Thermal magnetic release

?Electronic release

BDM2 22SE: protection of low-voltage distribution networks for BDM2-100160250

1. Overload protection with adjustable threshold  2. Short-circuit protection with adjustable threshold 3. Load indication : light at 90% of Ir setting threshold;  Flashing at 105% or more of Ir setting threshold

BDM2 22ME: protection of motor for BDM2-100160250

1. Overload protection with adjustable threshold, as defined by IEC60947-4 (2) tripping class 10 2. Short-circuit protection with fixed threshold (13xIr) 3. phase failure protection (tripping time delay between 3.5s-6s) 4. Load indication : dark less than 105% of Ir setting threshold;  Flashing at 105% or more of Ir setting threshold

BDM2 23SE: protection of low-voltage distribution networks for BDM2-400630

1. Overload protection with adjustable threshold  2. Short-circuit protection with adjustable threshold 3. Load indication : light at 90% of Ir setting threshold;  Flashing at 105% or more of Ir setting threshold

1. Overload protection with adjustable threshold, as defined by IEC60947-2  2. Short-circuit protection with adjustable threshold  3. Instantaneous short-circuit protection 4. Earth fault protection with adjustable threshold 5. Load indication : light at 90% of Ir setting threshold; Flashing more than Ir setting threshold 6. Fault indication LEDs indicates the type of fault that caused tripping Overload (LT protection) or abnormal component temperature (>Ir); Short-circuit (ST or instantaneous protection)( >Im); Earth fault (if earth fault protection option is present)(Ig); Microprocessor malfunction (both (>Ir) and ( >Im) LEDs go on ,plus the (Ig) LEDs if earth fault protection option is present ) Battery powered. Spare battery are supplied in an adapter box. When a fault occurs , the LED indicating the type of fault ,lights for about 10 minutes . The information is however stored in memory . The LED can be illuminated by pressing the test pushbutton. The LED automatically goes off and the memory is cleared when the circuit breaker is reset .

BDM2 43ME: protection of motor for BDM2-400630

1. Overload protection with adjustable threshold, as defined by IEC60947-4 (2) tripping class 10A,10 and 20 2. Short-circuit protection with adjustable threshold (6...13xIr) 3. Phase failure protection (built-in electronic release: operates unbalanced single-phase  currentat 40% and more than )(tripping time delay 4s?0%),as defined by IEC60947-4.1  4. Load indication : Flashing more than Ir setting threshold  5. Fault indication LEDs indicates the type of fault that caused tripping Overload (LT protection) or abnormal component temperature (>Ir); Short-circuit (ST or instantaneous protection)( >Im); Phase failure (right LED); Microprocessor malfunction ( (>Ir) ( >Im) and phase failure LEDs all go on ) Battery powered. Spare battery are supplied in an adapter box. When a fault occurs ,the LED indicating the type of fault ,lights for about 10 minutes . The information is however stored in memory . The LED can be illuminated by pressing the test pushbutton. The LED automatically goes off and the memory is cleared when the circuit breaker is reset .

Accessories Under-voltage release  Shunt release Auxiliary contact Alarm contact Rotary handle Plug-in base Rotary handle ? Direct rotary handle Degree of protection:IP40 Function: 1) suitability for isolation 2) indication of three positions 0(off) I(on) and tripped 3) press ush to trip?button, can trip-free 4) visibility of and access to trip unit settings 5) the circuit breaker can be locked in the off position by one to three padlocks , diameter 5 to 8mm(not supplied)  ?Extended rotary handle Degree of protection:IP55 Function: 1) Suitability for isolation 2) Indication of three positions 0(off) I(on) and tripped 3) Visibility of and access to trip unit settings when the door is open 4) Door opening prevented when circuit breaker is on  5) The circuit breaker can be locked in the off position by one to three padlocks , diameter 5 to 8mm(not supplied).Locking prevents opening of the switchboard door Installation:Circuit breaker may be mounted vertically, horizontally or flat on their back without any derating of characteristics. Fix:Mounting on backplate , mounting on rails Connection:Front panel connection , black panel connection , plug-in connection Outline and Installation Dimension BDM2-100~630